Skip to Content

Your Favorites

  • Glidden<sup>®</sup> Diamond<sup>®</sup> Interior Paint

    DISCONTINUED

Glidden® Diamond® Interior Paint

View Data Sheets
Select a color above to buy online
Find a Store
Pro opening paint can

Product Details

Replaced by PPG Prominence Interior Paint & Primer

The improved DIAMOND™ Interior 100% Acrylic Paint + Primer* provides exceptional durability and hide and outstanding stain resistance all in a smooth finish. And now with the convenient DIAMOND™ Interior Ready to Use product you can achieve a beautiful color while protecting and beautifying any room in your home. All backed by a Lifetime Guarantee. 

Features:

  • Delivers Exceptional Durability and Hide
  • Oustanding Washability, Scrubbability & Stain Resistance
  • Advanced Leveling for a Smooth Finish
*Separate primer or multiple coats may be required. See back for details. **Colorants added to this base paint may increase VOC level significantly depending on color choice.

Area Preparation

Surface must be dry. Remove all loose, peeling paint, dirt, grease, and any other surface contaminants. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough and patched surfaces. When applied to an uncoated substrate, two coats are required, with the first coat acting as the primer. Uncoated substrates, repaired surfaces or lightly stained areas may require additional coats. For severe stains, water marks, and other challenging conditions such as bare metal or chalky surfaces use the appropriate primer. WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1‑800‑424‑LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application Details

Stir thoroughly. When using more than one can of the same color, intermix to ensure color uniformity.

Drying Time

DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity. To Touch: 1 hour To Recoat: 4 hours

Coverage

COVERAGE: Approximately 300-400 sq. ft. (27.9-37.2 sq. meters) per U.S. Gallon (3.78L) on smooth, nonporous surfaces.

Cleanup

CLEANUP: Clean brushes and tools with warm, soapy water

Product Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Looking for a datasheet? Access PPG's full datasheet portal here or visit https://products.ppgac.com/

Code Sizes Download